How to clean vinyl floors in 2022

Our Top 4 Best Vinyl Floors Cleaner

Vinyl floors are the most important in high-traffic areas of a house but it needs to still care for and cleaning for looking best. But we are not able to clean properly vinyl floor. So we are going to write a review about how to clean vinyl floors.

In recent years, vinyl floors have been fashionable. They are resistant to stains, humidity, scratches, and a lot of traffic. Besides being hard, they are anti-noise and easy to install.

How to clean vinyl floors

You could damage them when cleaning them with abrasive products, steam machines, solvents, waxes, among others. That is why in this article I will tell you about how to clean the vinyl, the materials you need and how to vacuum them.

What do you need how to clean vinyl floors?

Vinyl floors, unlike wooden and parquet floors, need less maintenance. The best thing to do for maintenance is to vacuum every 2 or 3 days.

The microfiber mop is another ally in cleaning vinyl. This will help you apply the product you have chosen. Remember that the disinfectant or soap should not be abrasive, it is also important that you take into account the color, as it could stain the floor.

Although vinyl is resistant to moisture, I think the best way to clean them is by applying the product with a spray, then you can rinse with water. Rinse the microfiber in a bucket of water and wipe it on the floor.

Finally, you can wipe with a dry mop or wait for the wind to do its job. In relation to the products to use, the best is warm water and a soap with a neutral pH.

In the market, you can find a wide variety of special disinfectants for vinyl. Do not apply dark products on light floors, because you could stain them.

In case you get lemon juice, oil, vinegar or tomato sauce, you will need to clean it immediately to avoid stains. If any are left, add rubbing alcohol to a microfiber cloth to clean the stain, then rinse with water.

Under the heaviest furniture you can place felt pads so that when rolled, they do not scratch the floor.

How to vacuum vinyl flooring well?

  • To carry out this step, use a vacuum cleaner type broom or that has a broom nozzle. Don’t use rotating brushes, it won’t be necessary.
  • Start by moving away from the lighter furniture and cords that are close to where you will be vacuuming.
  • Aspire by imagining pictures on the floor for which you should not leave an empty space.
  • In the corners and at the junction between the floor and the wall, use the small flat nozzle.
  • Don’t forget to vacuum under heavy furniture, beds or shelves, otherwise, that dirt will go to the side where you cleaned.

How to Clean Luxury Vinyl Plank Flooring?

Once you’ve installed your luxury vinyl plank flooring, you’ll want to keep it fresh and clean, but you might be wondering. How should I do this? While luxury vinyl flooring is easy to maintain, it is also important to know how clean it properly to preserve its durability. Whether you are looking for tips on how to handle regular cleanings or what to do if you notice marks of scratches, this guide gives you important information on how to clean floors from luxury vinyl planks.

Using vinegar to clean luxury vinyl floors

White vinegar is a common ingredient in many floor cleaners should not be used on certain household surfaces because it can cause damage. Fortunately, luxury vinyl flooring is not one of those surfaces.

In fact, apple cider vinegar is an excellent vinyl floor cleaner. The acidity in vinegar can remove grime and dirt without leaving buildup and residues like soap. Just make sure you don’t use pure vinegar to clean your floors, this can dull the finish, and there is no way to polish vinyl floors to restore shine.

To make a homemade floor cleaner using vinegar, simply mix a cup of apple cider vinegar in a gallon of water. You can use a wet mop to clean your floor. Be sure to frequently rinse the mop with hot water while cleaning. If you are looking to disinfect and clean your floors at the same time, you can use white vinegar.

If your floors are especially dirty, add a few drops of liquid soap to wash dishes, to your mixture of vinegar and water, before mopping them. Then clean your floors a second time, just with water and vinegar. Finally, if you want to add a little shine to your floors, pour a few drops of baby oil into the vinegar water and this cleaning solution will do the trick.

Keep pH neutral cleaners

It is important to note that you should not clean your luxury vinyl floor with bleach, ammonia, or any high pH detergent. These cleaners are corrosive and can damage your floors. Instead, you need to look for pH neutral cleaners.

In fact, one of the best cleaners for your vinyl floors is, a solution simple one ounce of mild dish soap, in one gallon of plain water.

Since standing water can damage or stain vinyl flooring, it is important to use a microfiber mop instead of a string mop when cleaning.

You should also squeeze all excess water out of the mop, before using it. Yes use dish soap in the cleaning solution, don’t forget to rinse the mop with clean water before the last pass to finish cleaning the floor. The final step in the cleaning process is to dry the floors with a clean cloth or towel.

If you have a stain on your vinyl floor, you can try rubbing it off with rubbing alcohol isopropyl, or with a paste of water and baking soda or hydrogen peroxide at 3 percent.

Does vinyl need wax?

Luxury vinyl floors do not require the application of any type of wax. However, you can benefit from an acrylic finish, and it is important to understand the difference between the two types of wax. Floor wax is typically derived from carnauba wax, which turns it into a more solid substance. It also requires a special tool to apply and polish the floor.

Imagine a janitor applying wax on a school or hospital floor using a large polishing machine to make the floor look clean and shiny and you will understand how this type of floor wax. On the other hand, an acrylic-based finish is a liquid substance that is applied using a bucket and mop. Manufacturers often recommend the use of an acrylic finish in areas where scrapes or scratches are likely to occur.

Although the acrylic finish is not a requirement, it can add shine and provide a protective barrier when properly applied. This can also help increase the longevity of your floor.

If you decide to use an acrylic finish on your luxury vinyl plank flooring, it is important to remember not to polish it with a high-speed burnisher or polisher.

This is because high-speed polishing can penetrate your floor coat and wear it down and even possibly cause the layers to separate over time, which will destroy your floor. Instead, you should slowly polish the acrylic finish on your floor. The luxury vinyl to make it shine.

How to repair scratches and scrapes

For starters, the best way to prevent scratches or scrapes from ending in your luxury vinyl floors is sweeping or vacuuming your floors every day to remove any dirt or debris that could cause damage. However, if you notice a scratch or scratch on your floor, you can try various options to remove it.

If it’s a small brand, a little light buffing might do the trick. Also can try a spot repair kit to remove the mark. If you have a scratch or a slightly larger scratch, consider applying a floor sealer from vinyl after washing the floor to hide the mark. A trick that many people ensure is to tie a tennis ball to the end of a stick and rub it on the scratch to make it disappear. You can also try applying a little oil of jojoba or WD-40 lubricant on a towel and rub it over the scratch until disappear.

For severe damage, such as a deep scratch, cut, or dent, it is you will likely need to replace the plank. Likewise, if you have a brand deep scratch or because something wore off the protective layer, it is usually better to replace the damaged part.

You love your luxury vinyl plank flooring, and you want to keep it and make it look beautiful for years to come. Consider these helpful cleaning tips, and you’ll know exactly how to clean your vinyl floor to keep it looking great.


Vinyl floors are a great option because they are resistant and have striking designs. To clean them always have a vacuum cleaner handy, use water sparingly and apply the products with a mop.

Don’t leave any spills uncleaned, as these are the ones that cause stains.

We recommend that you continue reading on the following link about broom-type vacuum cleaners, where you can see some recommendations to choose the device that best suits your needs.

Leave a Reply